Check up to three part numbers to perform an action. Click heading to sort any column.
The PT series offers 3 watt of isolated output power in an 8 pin SIP standard package. These converters have a 2:1 wide input voltage range of 4.5 to 9, 9 to 18, 18 to 36 or 36 to 75 Volts. This series of converters provides precise regulated output voltage ranging from 3.3 to 15 volts. The output voltage can be single or dual depending on the model. Other output voltages are also available and please contact DATEL if your application requires such modification.
This series features high efficiency up to 86%; 1500Volts of DC of isolation and can operate over the ambient temperature range of –40°C to +70°C without derating. These modules are fully protected against output short circuit and under overvoltage conditions.
Products : Custom Design & Solutions | Electronic Imaging | Sampling A/D Converters | Multi-Channel Complete | Data Acquisition | Sample/Hold Amplifiers | CMOS Flash A/D | Digital-to-Analog Converters | Multiplexers | |DC-DC Converters | Non-Isolated POL Series | Switching Regulators | 1x1, A-Series | 24-Pin DIP, TF Series | Sixteenth-Brick DC-DC Converters | Eighth-Brick DC-DC Converters | Quarter-Brick DC-DC Converters | Half-Brick DC-DC Converters | Full-Brick DC-DC Converters | Railway DC-DC Converters
| Solutions | Support | Contact | About